This product is a thermosetting molding plastic made of phenolic resin or its modified resin as binder, adding organic and inorganic fillers and other additives. It has many advantages such as good fluidity and high gloss.
Other names:
phenolic, bakelite powder, bakelite powder
Model: PF2A4-161 - j
Application: electrical appliances, electrical, auto parts, etc
Color: black, red, brown, green, blue and other colors, according to customer needs, modulation of various colors
Packing:the outer layer of the packing bag is made of plastic woven bag or kraft paper, and the inner layer is made of plastic film bag, 25kg each.
Storage: the product should be stored in a cool, dry and ventilated place, away from fire and heat sources, avoid the sun and rain.
NO |
properties |
unit |
standard |
result |
1 |
Volume factor |
|
≤3.0 |
2.44 |
2 |
Density |
g/cm³ |
≤1.5 |
1.475 |
3 |
Spiral fluidity |
mm |
agree |
8.5 |
4 |
Bending strength |
MPa |
≥80 |
82.5 |
5 |
Impact strength of simply supported beam (notch) |
KJ/m² |
≥5.0 |
5.7 |
6 |
Charpy impact strength |
KJ/m² |
≥1.3 |
1.5 |
7 |
Load deformation temperature tf1.8 |
℃ |
≥160 |
174 |
8 |
Volume resistivity |
Ω.cm |
≥1011 |
2.3*1011 |
9 |
Surface resistivity |
Ω |
≥101 |
3.1*1010 |
10 |
Electrical strength |
KV/mm |
≥10 |
10.5 |
11 |
Moulding shrinkage |
% |
0.4-0.9 |
0.73 |
12 |
Water absorption |
mg |
≤100 |
19.2 |
13 |
Combustion performance (UL94) |
mm |
V-0 |
3.0 |
14 |
Dielectric loss factor (1MHz) (tan6) |
|
≤0.1 |
0.08 |
1. With more than 20 years of industry experience, he is the "vanguard" of China's professional production of phenolic molding compounds
2. Have professional technical personnel, as well as a full set of production equipment
3. Since 15 years of foreign trade, it has been highly praised by 99.9% of the North American market
Shipping & Packing