This product is a thermosetting molding plastic made of phenolic resin or its modified resin as binder, adding organic and inorganic fillers and other additives. It has many advantages such as good insulation.
phenolic, bakelite powder, bakelite powder
Model:
PF2A4-161 - j
Application:
electrical components (bread oven, coffee pot, electric cake pan), etc
Color:
black, red, brown, green, blue and other colors, according to customer requirements, modulation of various colors
Packing:
outer layer is plastic woven bag or kraft paper, inner layer is plastic film bag, each bag is 25kg.
Storage:
the product should be stored in a cool, dry and ventilated place, away from fire and heat source, avoid sun and rain.
NO |
properties |
unit |
standard |
result |
1 |
Volume factor |
|
≤3.0 |
2.47 |
2 |
Density |
g/cm3 |
≤1.5 |
1.47 |
3 |
Mobility |
mm |
agree |
166 |
4 |
Bending strength |
MPa |
≥80 |
88.8 |
5 |
Impact strength of simply supported beam (notch) |
KJ/m2 |
≥1.3 |
1.56 |
6 |
Charpy impact strength |
KJ/m2 |
≥5.0 |
6.1 |
7 |
Temperature of deflection |
℃ |
≥160 |
181 |
8 |
Volume Resistivity |
Ω.cm |
≥1011 |
6.3x1012 |
9 |
Surface Resistivity |
Ω |
≥1010 |
5.6x1011 |
10 |
Dielectric Strength |
KV/m |
≥10 |
12.1 |
11 |
Moulding shrinkage |
% |
0.5-0.9 |
0.67 |
12 |
Water absorption |
mg |
≤100 |
19.7 |
13 |
Flammability (vertical combustion) (UL94) |
mm |
HB |
1.6 adopt |
14 |
Dielectric loss factor (1MHz) (tan6) |
|
≤0.10 |
0.07 |
15 |
Tensile fracture stress |
MPa |
≥50 |
53.0 |
1. With more than 20 years of industry experience, he is the "vanguard" of China's professional production of phenolic molding compounds
2. Have professional technical personnel, as well as a full set of production equipment
3. Since 15 years of foreign trade, it has been highly praised by 99.9% of the North American market
Shipping & Packing